|
|
@@ -52,7 +52,7 @@
|
|
|
"new-user-guider_tip_模块开机": "Press and hold the <color=#FFA500>\"Power on\"</color> \nkey on the module, and when \nthe green light flashes, the \nmodule is in the state of \nwaiting for connection.",
|
|
|
"new-user-guider_tip_连接设备": "Click <color=#FFA500>\"Connect\"</color> and wait for the device \nto prompt that the connection is \nsuccessful. At this time, the module \nis in the green state.",
|
|
|
"new-user-guider_tip_弓箭详情": "Click the <color=#FFA500>arrow</color> to enter the device \ninterface for module initialization.",
|
|
|
- "new-user-guider_tip_设备-陀螺仪校准": "Remove the aiming module from the smart bow \nand place it on a plane, \nand then click Gyr Init.",
|
|
|
+ "new-user-guider_tip_设备-陀螺仪校准": "Remove the aiming module from the smart bow \nand place it on a plane, and then click Gyr Init.",
|
|
|
"new-user-guider_tip_设备-地磁计校准": "Turn the individual aiming module continuously in different directions until it prompts that the initialization is completed. \n<color=#FFA500>Note: In order to avoid the interference of electronic products (mobile phones, etc.) on the initialization of the magnetometer, please keep the aiming module at a distance of more than 0.5 meters (half meters) from the mobile phone, etc. before starting the initialization of the magnetometer.</color>",
|
|
|
"new-user-guider_tip_查看设置": "Click <color=#FFA500>SetUp</color> to learn more",
|
|
|
"new-user-guider_tip_查看商城": "Click to view the <color=#FFA500>Shop</color>",
|
lvjincheng